✨ New Arrivals Just Dropped!Explore
#12 x 2-1/2" RE-GRIP METAL ROOFING SCREWS - Hex Washer Head - Self starting/self tapping - EPDM washer. Colored head.
#12 x 2-1/2" RE-GRIP METAL ROOFING SCREWS - Hex Washer Head - Self starting/self tapping - EPDM washer. Colored head.
✔Screws have a 1/4 Inch Hex Screw Head and ~5/8" diameter EPDM washer to seal screws to roofing panel
✔Re-Grip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
✔These screws should be used when replacing smaller nails or screws in roofing or siding projects
✔The color on the roof screw heads is painted with a two part polyurethane for longer product life
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing
Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here
Additional Color Matches by Manufacturer Available Here
Magnetic Hex Driver Available Here
✔Screws have a 1/4 Inch Hex Screw Head and ~5/8" diameter EPDM washer to seal screws to roofing panel
✔Re-Grip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
✔These screws should be used when replacing smaller nails or screws in roofing or siding projects
✔The color on the roof screw heads is painted with a two part polyurethane for longer product life
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing
Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here
Additional Color Matches by Manufacturer Available Here
Magnetic Hex Driver Available Here
Product Information
Product Information
Shipping & Returns
Shipping & Returns
#12 x 2-1/2" RE-GRIP METAL ROOFING SCREWS - Hex Washer Head - Self starting/self tapping - EPDM washer. Colored head.
#12 x 2-1/2" RE-GRIP METAL ROOFING SCREWS - Hex Washer Head - Self starting/self tapping - EPDM washer. Colored head.
#12 x 2-1/2" RE-GRIP METAL ROOFING SCREWS - Hex Washer Head - Self starting/self tapping - EPDM washer. Colored head.
✔Screws have a 1/4 Inch Hex Screw Head and ~5/8" diameter EPDM washer to seal screws to roofing panel
✔Re-Grip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
✔These screws should be used when replacing smaller nails or screws in roofing or siding projects
✔The color on the roof screw heads is painted with a two part polyurethane for longer product life
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing
Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here
Additional Color Matches by Manufacturer Available Here
Magnetic Hex Driver Available Here
✔Screws have a 1/4 Inch Hex Screw Head and ~5/8" diameter EPDM washer to seal screws to roofing panel
✔Re-Grip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
✔These screws should be used when replacing smaller nails or screws in roofing or siding projects
✔The color on the roof screw heads is painted with a two part polyurethane for longer product life
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing
Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here
Additional Color Matches by Manufacturer Available Here
Magnetic Hex Driver Available Here
Select Color
Select Quantity
From $19.58
Original: $55.95
-65%#12 x 2-1/2" RE-GRIP METAL ROOFING SCREWS - Hex Washer Head - Self starting/self tapping - EPDM washer. Colored head.—
$55.95
$19.58Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
#12 x 2-1/2" RE-GRIP METAL ROOFING SCREWS - Hex Washer Head - Self starting/self tapping - EPDM washer. Colored head.
✔Screws have a 1/4 Inch Hex Screw Head and ~5/8" diameter EPDM washer to seal screws to roofing panel
✔Re-Grip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
✔These screws should be used when replacing smaller nails or screws in roofing or siding projects
✔The color on the roof screw heads is painted with a two part polyurethane for longer product life
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing
Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here
Additional Color Matches by Manufacturer Available Here
Magnetic Hex Driver Available Here
✔Screws have a 1/4 Inch Hex Screw Head and ~5/8" diameter EPDM washer to seal screws to roofing panel
✔Re-Grip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
✔These screws should be used when replacing smaller nails or screws in roofing or siding projects
✔The color on the roof screw heads is painted with a two part polyurethane for longer product life
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing
Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here
Additional Color Matches by Manufacturer Available Here
Magnetic Hex Driver Available Here
