#12 x 2-1/2" Metal to Metal Type #3 Metal Roofing Screws - Hex Head Drill Point - 9/16" EPDM Washer. Colored head.
#12 x 2-1/2" Metal to Metal Type #3 Metal Roofing Screws - Hex Head Drill Point - 9/16" EPDM Washer. Colored head.
✔Self Driller Type #3 Metal to Metal Roofing Screws with a 5/16" Hex Head with a 5/8" EPDM Washer
✔The #12 x 2-1/2" Screw Has a Maximum Material Thickness of 1-1/4" with a 1/2" Drill Tip
✔Total Overall Length of the Screw Measured Under the Head is 2-1/2"
✔Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products
✔The Galvanized/Zinc Screws Are Rust Resistant Under Gone Over 1,000 Hours of Salt Spray Testing
✔Self-Drill Type 3 Will Drill Through Metal Roofing Panel, Into Steel Structure Without Pre-Drilling
✔The EPDM Washer is Designed to Seal the Screw to the Metal Roofing Panel to Prevent Leaking
✔The 5/16" Hex Head Provides a Solid Lock on the Screw for Easy Installation.
✔To Install Metal Roofing or Wall Panels on Steel Frame Buildings, Workshops, Garages, Farm Buildings
All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range.
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here - Follow the Link
Additional Color Matches by Manufacturer Available Here - Follow the Link
Looking for a 5/16" Hex Head Driver? Available Here - Follow the Link
Product Information
Product Information
Shipping & Returns
Shipping & Returns
#12 x 2-1/2" Metal to Metal Type #3 Metal Roofing Screws - Hex Head Drill Point - 9/16" EPDM Washer. Colored head.
#12 x 2-1/2" Metal to Metal Type #3 Metal Roofing Screws - Hex Head Drill Point - 9/16" EPDM Washer. Colored head.
#12 x 2-1/2" Metal to Metal Type #3 Metal Roofing Screws - Hex Head Drill Point - 9/16" EPDM Washer. Colored head.
✔Self Driller Type #3 Metal to Metal Roofing Screws with a 5/16" Hex Head with a 5/8" EPDM Washer
✔The #12 x 2-1/2" Screw Has a Maximum Material Thickness of 1-1/4" with a 1/2" Drill Tip
✔Total Overall Length of the Screw Measured Under the Head is 2-1/2"
✔Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products
✔The Galvanized/Zinc Screws Are Rust Resistant Under Gone Over 1,000 Hours of Salt Spray Testing
✔Self-Drill Type 3 Will Drill Through Metal Roofing Panel, Into Steel Structure Without Pre-Drilling
✔The EPDM Washer is Designed to Seal the Screw to the Metal Roofing Panel to Prevent Leaking
✔The 5/16" Hex Head Provides a Solid Lock on the Screw for Easy Installation.
✔To Install Metal Roofing or Wall Panels on Steel Frame Buildings, Workshops, Garages, Farm Buildings
All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range.
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here - Follow the Link
Additional Color Matches by Manufacturer Available Here - Follow the Link
Looking for a 5/16" Hex Head Driver? Available Here - Follow the Link
Original: $70.95
-65%$70.95
$24.83Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
#12 x 2-1/2" Metal to Metal Type #3 Metal Roofing Screws - Hex Head Drill Point - 9/16" EPDM Washer. Colored head.
✔Self Driller Type #3 Metal to Metal Roofing Screws with a 5/16" Hex Head with a 5/8" EPDM Washer
✔The #12 x 2-1/2" Screw Has a Maximum Material Thickness of 1-1/4" with a 1/2" Drill Tip
✔Total Overall Length of the Screw Measured Under the Head is 2-1/2"
✔Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products
✔The Galvanized/Zinc Screws Are Rust Resistant Under Gone Over 1,000 Hours of Salt Spray Testing
✔Self-Drill Type 3 Will Drill Through Metal Roofing Panel, Into Steel Structure Without Pre-Drilling
✔The EPDM Washer is Designed to Seal the Screw to the Metal Roofing Panel to Prevent Leaking
✔The 5/16" Hex Head Provides a Solid Lock on the Screw for Easy Installation.
✔To Install Metal Roofing or Wall Panels on Steel Frame Buildings, Workshops, Garages, Farm Buildings
All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range.
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.
Installation Instructions Available Here - Follow the Link
Additional Color Matches by Manufacturer Available Here - Follow the Link
Looking for a 5/16" Hex Head Driver? Available Here - Follow the Link
